Truck Mounted Cranes for Sale in USA


Although initially one of the leading truck crane companies in Canada, Technocrane Inc. also ships their line of compact cranes to the USA and Central America – most cranes are in-stock and shipped next day at very reasonable prices.

The BIGMAX TC series cranes are strong and light weight with hexagonal boom construction and can lift up to 5,300 pounds.  TC100 is the smallest. This compact crane has proportional controls for all functions including lifting, slewing, and extending.   There is also one extra fourth control function which can be used for winches, hydraulic outrigger stabilizers, etc.

A Bigmax TC100 stows completely in just over two square feet of deck area making it one of the best features of its compact design.  The boom, which extends to 9.2 ft from the center line of rotation, retracts to only 3.9 ft. and can lift 1,760 lbs at this point.  With the small footprint of this crane, it makes it possible to mount inside the doorway of a van to swing a load in or out.  With the boom in a horizontal position, the TC-100 will also lift in an overhead space of only 5.5 feet above the surface of the deck.  This TC100 telescopic crane can be installed on a vehicle as small as a 1/2 ton truck.

Truck Crane Mounted in Van

Truck Crane Mounted in Van

Compact hydraulic truck mounted cranes have been an excellent choice for work in aviaries, inside vans, for light delivery vehicles,on mining vehicles and other applications where the equipment must operate in very tight spaces.

If you would like to be a qualified hydraulic truck crane dealer in California, Oregon, Washington and Texas – please visit the Technocrane wholesale cranes website at for inquiries.

For a crane quote or further information about these high quality cranes for sale, call toll free to 1-877-531-8644, Ext. 1 or email for a quick reply.


Hydraulic Truck Cranes for Sale in USA

Hydraulic Truck Cranes For Sale in USA – Available Now

As one of the leading North American hydraulic truck crane companies, Technocrane Inc. always carries a large variety of their specialized small cranes in-stock and ready to ship immediately.  They are known for their expertise with small cranes for use on trucks or boats and they always give small crane buyers the attention and service they deserve.

The BIGMAX TC Series of small hydraulic or electric truck cranes was launched in 2005. Although these articulated cranes are compact and light weight, they are also very rugged and easy to install. The cranes are capable of lifting up to 5,000 lbs. with hydraulic extensions up to 19.5 feet. They are available in hydraulic (PTO) or 12 V DC electric models and are suitable for mounting on 10,000-18,000 GVW trucks. Also available are the optional wireless (radio) controls which give a single person the ability to safely lift and place any large object within the length of the boom.

Some of the most appreciated features of the BIGMAX truck cranes are the ease of operation and safety features. Safe movement and precise placement of heavy objects due to the proportional controls is a big advantage for most operators.  Although commonly used as a truck crane, they are also widely used for a variety of applications such as on trailers, warehouse decks, small boats, marina docks and used as robotic arms in specialized equipment.

BIGMAX also provides an industry-leading two year warranty which makes this another excellent reason why these are a popular crane for sale in the USA or Canada. Excellent shipping rates can be quoted to your location.

Technocrane also carries various styles and sizes of their hydraulic outrigger stabilizers – they are also in-stock for immediate delivery with the cranes.

We are looking for truck crane dealers in California, Oregon, Washington and Texas.  For more information please call 1-877-531-8644, Ext. 1.


Affordable Wireless Controls for Articulated Cranes

Wireless (radio) controls have been well accepted over the last 20 years on most large articulated hydraulic cranes. However, most of the smaller mono-boom cranes (ie. less than 4 t/m) have been manually operated using the hydraulic control valve on the crane.

Wireless controls have been slow to be accepted for smaller cranes for several reasons:

  1. While inconvenient, an operator of a small crane could still manage without remote controls. Small cranes have a shorter boom and therefore the load hook is usually less than 15 feet from the operator on the ground.
  2. Reliable FAA approved radio controls have been too costly to justify. In the past, adding wireless controls to a small crane meant increasing its cost by 50%. The option of supplying low cost controls (of garage door opener quality for example), was not a reliable and safe alternative.
  3. The few cranes that required radio controls had to be purchased with the equipment already installed at the factory with lead times of 90 to 120 days from Europe.  This delay was not acceptable to many crane purchasers.
  4. Radio controls could not be easily retrofitted to cranes in stock.

 Affordable and Reliable Wireless Controls Are Now Available

In a new development, Technocrane now offers a Hectronic wireless remote control system that is suitable for small mono-boom and articulated cranes with low volume hydraulic systems. This means that BIGMAX cranes from Technocrane’s stock can now be shipped with affordable, reliable wireless controls. In addition, BIGMAX cranes currently in service with manual controls can be economically retrofitted with wireless controls.

Reliability has been proven and Technocrane has modularized the design of BIGMAX cranes to allow radio controls to be added at the Canadian warehouse, rather than at the factory. This saves time and money which can be passed on to customers.

 How Do the Radio Controls Work?

The wireless controls are available with 3 or 4 functions as a direct replacement for the original control valve on the crane. The control valve replaces the original manually operated control valve that is standard on all BIGMAX cranes. The multi-function control valve has a flow control section with a flow divider that controls the operating speed of all hydraulic functions.

The electronic control valve is sectional and proportional. It includes man-sized emergency, manual over-ride levers to allow the crane to be operated manually in the event of an electrical problem, or if the transmitter is lost or broken. The wiring harness, which uses DIN connectors, is weather proofed for outdoor use.

The radio control system utilizes the proven Hetronic Hand Held MFSHL Series transmitter, and a multi section electronic valve providing proportional control for all functions. To operate, the function is selected by engaging a toggle switch, the speed is controlled by depressing or releasing a trigger.

The Hetronic hand held transmitter is available with 4 functions with or without additional PMW toggle switches for other non crane functions.

The transmitter is available with up to 6 toggle switches, three of which are used to operate the crane. The remaining switches can be supplied in various configurations from PMW momentary-on to 3 position type.

The additional switches are typically used to activate boom-mounted hammers, hydraulic winches and outrigger stabilizers.

Technocrane is a leading crane manufacturer for small truck cranes, marine cranes and hydraulic outrigger stabilizers. For further information about wireless radio controls for articulated cranes call Technocrane, toll free, at 1-877-531-8644 or visit the website at

Published By Todd Slobogean
CEO, Technocrane Inc.


OCTOBER 7, 2013

One of North America’s leading crane companies, TECHNOCRANE Inc., is pleased to announce the arrival of their latest 40′ container of BIGMAX cranes shipped direct from their crane manufacturers in Italy.

BIGMAX TC-Series Cranes are compact and versatile with strong yet light-weight boom construction. These electric or hydraulic truck cranes come in 7 models that can safely lift up to 5,300 pounds with hydraulic extensions up to 19.5 feet.

Technocrane now has over 80 cranes for sale that are in-stock and ready for immediate delivery.

Their small telescopic truck crane is rugged and easy to install and operate. The compact design means minimum mounting and stowage space required so they can be mounted on small service trucks including flat deck trucks and van interiors, as well as on trailers, docks and boats.

Technocrane, located in British Columbia, can ship cranes to all locations in Canada and the USA, as well as to Central and South America. The company specializes in small cranes and meeting the needs of small crane buyers.

For further information about a BIGMAX crane for sale, call toll free 1-877-531-8644 Ext 1.